Product Categories

Products By Manufacturer

  Home > K1CRA Custom Products > Antenna Mounts and Hardware >

K1CRA DMOUNT4 "Stick" Antenna Vert/Horizl/Vee Dipole Mount - Isolated Connectors / 2" Mast / - SPECIAL ORDER

Alternative Views:

List Price: $34.95
Our Price: $29.95
Savings: $5.00

: Special Order - Please email for shipping time estimate.
Product Code: K1DMOUNT4

Special Order -

K1CRA's Exclusive DMOUNT4 - for 3/8" HF Stick Antennas and 102" Whips Turns two 3/8" x 24 Thread Mount Antennas into a Fully Isolated Horizontal, Vertical or Vee Dipole!

Accepts up to 2" Mast!

Following in the footsteps of the famous Workman RVD 3/8" dual antenna mounts, we've improved on the design to simplify AND to accommodate larger masts. Our new designs offer more flexibility in mounting and eliminates a weakness with the RVD whereby it's own hardware prevents mounting on "regular" size supports.

The K1CRA DMOUNT's are by far the best dipole mounts on the market. Rugged and perfect for use in permanent or portable installations, they mate perfectly with our own 21' telescoping mast, wooden dowels, conduit and most tower leg stand-off mounts. And now, the K1DMOUNT3 and K1DMOUNT4 mount on up to 2" Masts!

You can use these simple mount brackets to turn two HF stick antennas into a rotatable horizontal or vertical dipole! Each come with (1) SO-239 to 3/8" Stud Mount for the driven element and (1) 3/8" Stud Mount for the counter-poise element. Version 3 and 4 include fully isolated antenna connections to insure TRUE DIPOLE performance by isolating the support mast from the radiating elements. The UHF Female connector allows for direct coax connection with a PL-259 and the heavy-duty muffler clamp provides secure grip on pipe or mast up to 2" thick.

The DMOUNT1 is the lightest and simplest to use. It also keeps the ground plane counterpoise whip more inline with the driven element. Recommended for quick, portable operation, it works equally well in permanent installations. Simply screw on your PL-259 equipped coax, then attach to your mast. Then screw on your two stick antennas to complete assembly. Rotate the mounting plate for either vertical or horizontal configurations. The DMOUNT2 is heavier and a bit more rugged. It provides more room to work with around the fittings but does move the counter-poise to the opposite side of the support mast. The DMOUNT3 provides extra strength and full RF isolation from metal mounting masts. And, it's 2" muffler clamp allows for mounting on larger masts! The DMOUNT3 is for horizontal dipoles only but is ideal for permanent installations due to its heavy duty components.

The DMOUNT4 is the same as the DMOUNT3 with the addition of two 90 degree swivel adapters. These adapters provide the ability to adjust each element from vertical to any angle in between. As such, you can create horizontal, vertical "V" and Inverted "V" antennas with ease! Removing the adapters brings you right back to the DMOUNT3 should you need only a horizontal configuration with additional strength. You can also use DMOUNT's with 102 inch stainless whips or other whips antennas, including CB! The 102" whip creates a FULL SIZE 10/11 meter dipole and, with a tuner, an all-band rotating dipole!
Heavy Duty Aluminum Mounting Plate 9" x 2" x 1/4" 2" Zinc U-Bolt/Muffler Clamp with Locking Nuts SO-239 (Female UHF) Connector 3/8" x 24 Thread (Female) Isolated Driven Element Connection 3/8" x 24 Thread (Female) Isolated Counter Poise Connection Insulators and Aluminum Strap provides proper isolated DC connection to Counter Poise Element 90 Degree Swivel Adapters with Lock-washer and screw adjustment hardware.

Share your knowledge of this product. Be the first to write a review »