Product Categories

Products By Manufacturer

  Home > Workman Electronics > Power Supplies >

Workman KW2000A - Replacement Power Cord Plug For Alinco, Kenwood, Icom, Yaesu
Workman KW2000A - Replacement Power Cord Plug For Alinco, Kenwood, Icom, Yaesu


 
Alternative Views:
Quantity Discounts Available!
List Price: $8.95
Our Price: $5.95
Savings: $3.00

Product Code: WORKKW2000A
Qty:

Description
 
NOTE: TO PURCHASE THIS ITEM, PLEASE VISIT US ON EBAY: The K1CRA Radio Store on EBAY

Due to recent changes in tax laws and shipping regulations, we have moved some items to eBay for a smoother and more accurate experience.

The Workman KW2000A is a direct replacement 12 Volt power cord plug for Alinco, Kenwood, Icom and Yaesu Transceivers. It is the old "standard" plug for many transceivers and if the picture matches your plug, it will work with your radio. Comes complete with outer black plastic boot and 4 pins. Note, 4 pins is what most radios use. Two on the right (facing from the rear) are for POSITIVE and two in the middle are for NEGATIVE. The remaining pins are not commonly used. To help visualize, we show the end view of a second plug. The shapes of each are highlighted in black. You will receive only one nylon plug without the black highlighting. Known to work with: Kenwood: TS50, 120, 130, 140, 180, 430, 440, 450, 570, 870 Yaesu: FT840, 857, 897, 890, 920, 847 Icom: IC751, 740, 745, 735, 706, 706mkII, 706mkIIG, 707, 718, 720, 730, 737, 738, 746, 756 Alinco DX77, DX70T/TH Most any radio with the 6 pin Molex plug. Please look closely at the connector detail in the pictures. If the pin layout is the same, this is the correct plug for your radio.
Features
  • Nylon, Keyed Body
  • 4 Crimp / Solder Pins
  • Black Outer Sleeve

Share your knowledge of this product. Be the first to write a review »